Hi-Shear Corporation

2600 Skypark Drive

Torrance, CA 90509, U.S.A.

Telephone: 310/326-8110

Fax: 310/784-4144

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Installation Tooling

Product Information / Downloads

The following documents are available for download in Adobe Acrobat .PDF file format.  If you have already installed Adobe Acrobat, clicking on any of the links will open the document in your browser.  Right click to download the document to your computer.  If you have not installed Adobe Acrobat, please click here to download the program to your computer.

Thank you for visiting Hi-Shear’s web site. By visiting this web site, you are accepting the policies and practices described in our use policy.

Installation Tools

Hi-Shear Air Driver Assemblies are designed specifically for installing Hi-Lite, Hi-Lok and Hi-Lok/Hi-Tigue Pin and Collar fastener combinations.  The tools come in a variety of sizes and configurations, to drive fasteners in both open and restricted-access areas.

The tooling is compact, lightweight, fast and reliable.  It generates low noise compared with conventional riveting, requires minimum employee training, and is designed to operate at a normal factory air pressure of 90 psi with 1/4 or 3/8 inch air lines.

Standard configurations are shown on picture above.  Virtually any requirement can be fulfilled by Hi-Shear's Tooling Division - with either our standard tools or by custom design.

Hi-Shear also provides a full series of hand installation tools and toolkits, as well as gages for fastener selection and inspection of installed fasteners.

[General Information]  [Pistol-Grip Drivers]  [Automated Systems]  [Ratchet Drivers]  [Hand Tools]  [Gauges]  [Removal Tools]  [Self-Index Drivers]  [Sockets]

  • Pistol-Grip Drivers: Pneumatic installation driver tools, 0.7HP, rated at 300 in-lb max (at 90psi), with socket speeds of 250 RPM.  The following configurations are available:
    HLA1051 Straight driver assembly with extended socket and super- key
    HLA1066 Offset driver assembly with clutch, extended socket and super-key
    HLA1071 1" offset driver assembly with interference fit flush socket
    HLA1072 1" offset driver assembly with thin flush socket and super-key
    HLA1076 2" offset driver assembly with multi-length socket and super-key
    HLA1079 2" offset driver assembly with thin flush socket and super-key
    HLA1084 2" offset driver assembly with interference fit flush socket
    HLA1086 2" offset back drive driver assembly with extended socket and super-key
    HLA1097 4" offset driver assembly with flush socket and super-key
    HLA1201 1" offset mini driver assembly with thin flush socket and super key
    HLA1202 2" offset mini driver assembly with thin flush socket and super key
    HLA1203 1" offset mini driver assembly with multi-length socket and super key
    HLA1204 2" offset mini driver assembly with multi-length socket and super key
    HLA2068 Heavy Duty 2" offset driver assembly with 2" extended socket and super-key
    HLA3023 6" offset back drive driver assembly with extended socket and super-key

    HLA3025

    		 6" offset driver assembly with multi-length socket and super-key
    +... Pistol-Grips, Complete Catalog   32 pages, 2.1MB.  Includes all tools above

 

  • Automated Fastener Installation: Includes pneumatic installation drivers with automatic collar feeders and feeding systems for automated assembly equipment

HLA1007 Automatic Feed Driver Assembly, 1 inch offset
HLA1008 Automatic Feed Driver Assembly

auto fastening

 Universal Collarmatic Drivers for drill-type riveters

 

  • Ratchet Drivers: Pneumatic installation driver tools, 0.7HP, rated at 300 in-lb max (at 90psi), with socket speeds of 250 RPM.  The following configurations are available: 
    HLA2002 Straight ratchet wrench driver assembly with multi-length socket and super-Key
    HLA2006 Straight ratchet wrench driver assembly with flush socket and super key
    HLA2008 20 deg offset ratchet driver assembly with flush socket and super key
    HLA2016 20 deg offset ratchet wrench driver assembly with multi-length socket and super-key
    HLA2026 Small 20 deg offset ratchet wrench tool assembly with quick change thru-hex extended socket
    HLA2033 Small 20 deg offset ratchet wrench tool assembly with interference fit extra thin socket
    HLA2073 Medium 20 deg offset ratcher wrench driver assembly with thin flush socket and super-key
    HLA2075 Medium 20 deg offset ratchet wrench driver assembly with multi-length socket and super-key
    HLA3000 Large straight ratchet wrench tool assembly with flush socket and super key
    HLA3020 Large 20 deg offset ratchet wrench tool assembly with flush socket
    HLA3502 Large straight ratchet wrench tool assembly with extended socket and super key
    HLA3522 Large 20° offset ratchet wrench tool assembly with extended socket and super key
    HLA4001 Large straight heavy duty ratchet wrench tool assembly with flush socket
    HLA4007 Large straight heavy duty ratchet wrench tool assembly with quick change extended socket
    HLA4008 Large 20 deg offset heavy duty ratchet wrench tool assembly with quick change extended socket
    HLA4020 Large 20 deg offset heavy duty ratchet wrench tool assembly with flush socket
    HLA7000 Large straight heavy duty ratchet wrench tool assembly with flush socket
    HLA7020 Large straight heavy duty ratchet wrench tool assembly with extended socket
      Complete Catalog 36 pages, 3.2MB.  Includes all ratchet drivers listed above